Dental Lab Customer & Production Management

Novea

Novea

Previous topic Next topic  

Novea

Previous topic Next topic  

 

Each Lab may have their own shipping account. These are Novea Shipping options:

 

V12 - Laboratory Lists - Laboratories - Shipping Carrier - Novea

Shipping Carrier  - Novea tab

1.Enable Novea Shipment - to allow shipping with Novea.

2.You may select the option Enable Novea Pickup. Only if this option is enabled is when you are allowed to make further settings for pickups.

If you wish to Enable Pickup Scheduling on the Web check this option.

3.The Last option is to Process in Test Mode.

4.Label Printing Options:

click on V9 - Label printing option

Shipping Label Options form displays

V12 - Laboratory Lists - Laboratories - Shipping Carrier - Novea - label

Shipping Label Options

Print logo on all carrier labels - printing logo requires 4X8 inch label.

Enter Logo - Logo may not exceed 4X2 inches

Select Inbound and/or Outbound Shipment

Print Barcode on label - if checked the select on what label to print between Customer and Account Number and select printing for Inbound and/or Outbound Shipment

Print shipment label receipt - check if you need to print shipment label receipt. Following there are some options for this label

Select printing for Inbound and/or Outbound Shipment

Print Label Receipt on the bottom of the label - not supported with Novea. Printing Receipt requires 4X7 inch label, combined with Logo, requires 4X9 inch label Print Receipt supported for FedEx, Ups and Purolator

For Fulfillment Shipping, do not Print Logo or Receipt.

Click V9 - Save when done.

5.Enter if necessary Alternate Shipping and Pickup Address - you can add alternate Outgoing Shipments address and alternate Incoming Pickups addresses.

Click on V12 - alternate pickup and shipping address

Alternate Shipping and Pickup address form will open

V12 - Laboratory Lists - Laboratories - Add new lab - Shipping Carrier - alternate address

Alternate Shipping and Pickup address form

Please Note: If you wish to use the Lab address the leave the fields blank, or use the V12 - update the lab address button to update Outgoing or Incoming addressees with the Lab Address.

Enter Address for Outgoing Shipments

Enter Address for Incoming Shipments (Depot Location)

Check Use this Address for Return Labels also if you need the same address for the Return Label.

Click V9 - OK 2 when done.

6.Enter Credentials:

Fill in: Customer ID, User ID and Password.

Select a Service Type that will be default type when shipment will is scheduled. Select from the options in the Default Service Type drop down list.

For return label, set name to - enter name  

 

See also:

Shipping Carrier

Laboratories